HOME WIND POWER SYSTEM INSTALL
HOME WIND POWER SYSTEM GENERATOR
HOME WIND POWER SYSTEM CODE

There is no danger to either charger, it is safe to have multiple chargers onto a shared battery bank. an Outback FM80 and my DIY wind charge controller. I effectively have two chargers in parallel with my LifePO4 battery bank i.e. I didn't need to buy a hybrid charge controller. I learnt the hard way that a blocking diode is needed between the battery and the converter output. The lower the input voltage and higher the output current for the DC DC converter is the best method to extract the most energy from the PMA into the battery bank. Due to the wind strength in my area, the loaded output from the PMA is up to 14 volts max. I used a low input voltage (3V) DC DC Buck Boost Converter as my charge controller set to give a constant 29 volts into my 25.6v Lifepo4 battery bank. If you have high wind levels (greater than average of 9m/s) and do not have a load always on your batteries then you will need a dump load. Also since I don't experience consistent wind levels in my area, I don't need a dump load. I didn't trust the oem charger that came with the turbine. It is made entirely from scrap materials except for the bolts and pop rivets, and should cost about 15-30 for the three vane version, which can be made by one person in six hours without much. Read on for how I installed my wind turbine. You can't expect to always call someone should there be issues during operation. Owning a power harvesting system means you are responsible for it.

HOME WIND POWER SYSTEM CODE

I have fulfilled code (NFPA 70, TTS-171 Part 1) and power utility requirements.Ĥ. A Wattsun dual-axis tracker with 3.96 kW of solar PV installed in 2018, 2 Zomeworks seasonality adjustable passive trackers with 2.01 kW of solar PV on each array installed in 2015, The wind turbines are on 45 monopolies Generally, the wind makes more noise than the turbines. In your case you will either need to be competent in electrical installations or hire an experienced electrical professional to do it.ģ. The video gives an overview of our solar PV and wind power systems. The entire design and installation I performed myself. I cannot provide technical help on grid tie questions.Ģ. Notes to remember in this instructable: 1. In my opinion its better to buy a turbine then modify it rather than build one from scratch.Īlso here is the instructable on how I solar powered my home.Īfter the work involved I can safely say that solar alone is a much easier installation. Here is the instructable on the work I did to prepare my turbine. Most manufacturers produce a sub par product and as a DIY person I needed to make sure it would work upon commissioning. It requires work first and in my case, significant modification.

HOME WIND POWER SYSTEM INSTALL

If you want to install a wind turbine please note that this is not a device you can install straight out of the box. If you live in high wind areas such as at a coast line then wind power should be viable for you. So far the results have been quite interesting.

This project I did in order to test a theory.

Solar is the real resource and it is dependable. Wind power is not a reliable resource in my location.

I have become the first person on my beautiful island to implement a hybrid (solar and wind) power system for their home (not counting those yachts!).

HOME WIND POWER SYSTEM GENERATOR

This generator feeds power into my home which is already solar powered. I finally got my Aleko WG400 wind turbine installed.

Home wind power system